6
■
Do not sit or place heavy objects on
this projector.
•
Do not sit on this projector.
This could result in overturning,
leading to damage or personal injury.
Use special caution in households
where children are present.
•
Do not place heavy objects on this
projector.
Placing heavy objects on this projector
could result in loss of balance or falling
and cause personal injury.
■
Do not block the ventilation openings.
Do not block the ventilation openings of
this projector.
Blocking ventilation could lead
to internal overheating which could result in
fire. Do not place this projector on its
side during use or push it into a small,
poorly ventilated location. Do not
place this projector on a carpet or
bedding or cover it with a table cloth,
etc. Also, when installing this projector, make
sure the ventilation openings are at least 10cm
from the wall.
■
Care and maintenance.
For safety purposes, disconnect the power
plug from the power outlet
before starting the care and
maintenance of this projector.
■
Battery usage.
•
Use only the specified batteries with
this projector.
Do not mix old
and new batteries because this
could result in fire or personal
injury due to battery cracking or
leakage.
•
Make sure the plus and minus
terminals are correctly aligned
when loading the batteries.
Incorrect loading could result in
personal injury or contamination of
the surroundings due to battery cracking or
leakage.
■
Clean the projector interior once
every two years.
Request your dealer to clean the interior
of the projector approximately every two
years.
Accumulations of dust inside the
projector can result in fire or
malfunction if not cleaned for an
extended period. This cleaning is
more effective if performed befor
every humid periods such as rainy
season, etc. Ask your dealer for details about
internal cleaning.
■
Avoid installation in humid or dusty
locations.
•
Do not install this projector in a humid
or dusty location.
This could
result in fire or electrical shock.
•
Avoid installation near the
kitchen, a humidifier or other locations
where there is oily smoke or humidity.
This could result in fire or electrical shock.
■
Use the caster brakes.
When installing this projector on a stand
with casters, use the caster
brakes to prevent the stand
moving or over turning and
causing personal injury.
■
Do not handle the power cord roughly.
•
Keep the power cord away from
heaters
because the heat could melt the
power cord and cause fire or electrical shock.
•
Do not touch the power plug
with wet hands
because this
could result in electrical shock.
•
When disconnecting the
power plug, do not pull on the power
cord.
This could damage the power cord and
cause fire or electrical shock. Always grip the
plug when disconnecting.
Disconnect the
plug from the
power outlet.
Caution
Содержание CP-S860E
Страница 2: ......
Страница 36: ...QR41821 Printed in Japan KY K S ...
Страница 38: ......
Страница 72: ...QR41821 Printed in Japan KY K S ...