Hitachi CP-CW251WN страница 101 Скачать руководство пользователя

Страница: 101 / 113

101

Maintenance

Other care

In order to ensure the safe use of your projector, please have it cleaned and

inspected by your dealer about once every year.

►Before caring, make sure the power cord is not plugged in,

and then allow the projector to cool sufficiently. The care in a high temperature

state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in

a fire, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

WARNING

►Please take right care of the projector according to the

following. Incorrect care could cause not only an injury but adverse influence

such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specified in this manual.

►Do not polish or wipe with hard objects.

NOTICE

►Do not directly touch the projection window surface with hands.

CAUTION

Inside of the projector

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner

diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a

soft, dry cloth.

Incorrect care could have adverse influence such as discoloration, peeling paint,

etc.

Caring for the cabinet and remote control

Caring for the lens

• If the lens is flawed, soiled or fogged, it can cause deterioration in display quality.

Handle the projector carefully to prevent the lens from being scratched or soiled.

• If the lens is soiled or fogged, please take care of the lens by following steps

below.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufficiently.

After making sure that the projector is cool adequately, lightly wipe the lens

with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

Содержание CP-CW251WN


















































































































Результаты поиска

Содержание CP-CW251WN

Отзывы:

Похожие инструкции для CP-CW251WN

Бренды по названию

Популярные бренды

Hitachi CP-CW251WN, Руководство пользователя

Результаты поиска

Содержание CP-CW251WN

Отзывы:

Похожие инструкции для CP-CW251WN

Бренды по названию

Популярные бренды