Hitachi Compute Blade 2500, Руководство по началу работы

Страница: 12 / 154

maintenance personnel instead of attempting to install or remove the
system unit. Defective installation might cause the system unit to fall,
resulting in injury or unit failure.
¢
When pulling a unit out from a rack cabinet to work on it, attach a
stabilizer to the rack cabinet. Excessive force might cause the rack
cabinet to fall down, resulting in injury or an equipment failure. If a
stabilizer is not attached, call for maintenance personnel.
Using a rack cabinet
When using a rack cabinet, do not place anything on the system unit
mounted on the cabinet and do not use the top of the system unit
mounted on the cabinet as a work bench. A heavy object placed on top of
the system unit on the cabinet might fall, resulting in injury.
Contact with metal edges
When moving the equipment or adding parts, take care not to hurt
yourself on the metal or plastic edges. Inappropriate handling can cause
injuries.
Improper battery type
There is a risk of explosion if a battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Handling batteries
Maintenance personnel should replace batteries. Do not replace batteries
by yourself. Follow the instructions described below. Inappropriate
handling can result in injury because a battery can overheat, burst, or
catch fire.
¢
Do not charge a battery.
¢
Do not short out a battery.
¢
Do not disassemble a battery.
Storing batteries
When storing batteries, apply adhesive tape to the terminals for
insulation. If the batteries are stored without insulation, the terminals can
contact each other to cause a short circuit and overheat or burst, leading
to injury or fire.
Insertion of foreign objects into the equipment
Do not allow clips, pins, or any other metal items or flammable items to
enter the equipment through a vent or by any other means. Using the
equipment under such conditions can cause an equipment failure.
Impacts from drops and falls
xii
Preface
Hitachi Compute Blade 2500 Series Getting Started Guide