background image

 

 

 

EN

G

L

ISH

 

English.doc •• 2002/11/4 •• 10:14••• 95% 

Limited Warranty for USA Customers Only   

Hitachi America, Ltd. warrants our Hitachi CRT color monitor to be free from defects in 
material and workmanship for 36 months from the date you purchased it if your 
purchase was made prior to 1/31/01 or 60 months if your purchase was made after 
1/31/01 from your authorized Hitachi America, Ltd. dealer. 
If you purchase a Hitachi Liquid Crystal Display (LCD) color monitor, Hitachi provides a 
warranty of 36 months for the panel and 12 months for the backlight if purchased before 
1/31/01 or 36 months for both panel and backlight if purchased after 1/31/01. In the 
event of a defect during this 12 month, 36 month or 60 month period, Hitachi America, 
Ltd. will, at its option, repair or replace the monitor at no charge except as set forth 
below. If proof of purchase cannot be provided by owner, the warranty period will start to 
run from the date of manufacture. 

Hitachi America, Ltd. may repair your monitor with new or reconditioned parts or replace 
it with a new or reconditioned monitor of the same or similar kind, and any replaced 
monitors or parts become Hitachi America, Ltd.'s property.   

Exclusions from this warranty:

 It is normal for Cathode Ray Tube (CRT) monitors and 

LCD display backlights to decrease in brightness as they age. This is a natural process 
in CRTs & LCDs due to the degradation of the LCD backlight and the degradation of the 
CRT phosphors that create the image and is not covered by this warranty. This warranty 
excludes decreased image clarity or reduced brightness due to natural aging of the 
monitor/display. In addition, this warranty does not cover phosphor burn. Phosphor burn 
can occur when a monitor is left with one static image for extended periods of time 
during which the image may become burned into the phosphors.   

This limited warranty does not cover damage occurring in shipping or in storage after 
you purchase the monitor or damage caused by abuse, accident, disaster, misuse, 
mishandling, mispackaging or shipping, improper installation, unauthorized repair or 
modification, or failure to follow the manufacturer's instruction with respect to the proper 
handling, operation, installation, service and maintenance of the monitor.   

To obtain warranty service, call 1-800-536-6721 to obtain a return authorization and the 
location of your Hitachi service center or return the monitor to the dealer from whom you 
bought it (subject to that dealers' return policy).   If you choose to ship the monitor 
rather than delivering it in person, you must assume the risk of damage or loss in transit. 
You must also use the original shipping container (or equivalent packaging), pay 
shipping charges, and enclose a copy of the proof of purchase date with the monitor. 
For additional information, please write to:   
 
                        Hitachi America, Ltd.   
            200 Lowder Brook Drive, Suite 2200, Westwood, MA  02090 
   
NEVER open the monitor cabinet.  If the monitor is not operating properly, contact 
Hitachi America Ltd. service center (Call 1-800-536-6721). 
Do not open the monitor housing under any circumstances. By opening the monitor 
housing you will expose yourself to high voltage and possible severe electrical shocks 
and void all warranties.   

Содержание CML171SXW














































Отзывы: