16
ENGLISH
Connecting the Display to your Computer
1.
Power off your computer.
2.
Connect one end of the signal cable to the LCD Monitor's VGA port. (See Fig. 1-4)
3.
Connect the other end of the signal cable to the VGA port on the PC.
4.
Make sure both connections are secure.
Figure 1-4
ATTENTION
This device must be connected to an off-the-shelf video cable in order to comply with
FCC regulations. A ferrite-loaded interface cable is included in the LCD Monitor package.
This device will not be in compliance with FCC regulations when a non-ferrite-core video
cable is used.
