Color Adjustment
Your own color balance can be set by adjusting each color components
of red, green and blue.
l
Color Selection
1
1
,
When the color button and one of
buttons are pressed,
two
of the button pressed will light.
corresponds to
red/green/blue with
l
Color Balance Adjustment
[+] [
I
While the
indicating red, green, or blue light, the monitor is the color
adjustment mode, and you can adjust each color by
button.
The LED will flash if it has reached its limit.
. . .
makes the selected color stronger.
makes the selected color weaker.
Press the store button to store your settings, after adjustment. It will be stored to
the user color balance
and it can be selected anytime afterwards.
(refer to
“Store Button”)
When any button other than color adjustment buttons are pressed, or when there
is no key input for about 10 seconds, the color adjustment mode will be cancelled.
The adjusted color settings are not stored without pressing the store button.
l
Color Reset
(in the color selection mode)
When you want to cancel the currently adjusting color balance, not stored, and
recall the previously stored color balance, keep pressing
and buttons at
the same time. about 2 seconds. in the color adiustment mode.
(While the
of
and
buttons remain lit.)
The
of
and buttons will light simultaneously and
momentarily. Then the picture color balance will be changed to the stored color
balance, selected previously, and you can restart the adjustment.
16
Содержание CM2096ME
Страница 2: ......
