Hitachi CH 3656DA, Инструкция по эксплуатации

Страница: 9 / 16

9
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit, the package contains the
accessories listed on page 14.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Fine trimming hedges
○ Trimming and pruning garden trees
SPECIFICATIONS
1. Power tool
Model CH3656DA
Voltage 36 V
No-load speed 1000 – 1500 /min
Blade size (Trimming width) 560 mm
Battery available for this tool* BSL36A18
Weight 4.1 kg (With BSL36A18 attached)
Continuous operating time (depending on the work
conditions)
Approx. 62.5 minutes
* Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
2. Battery
Model BSL36A18
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity
2.5 Ah / 5.0 Ah
(Automatic Switching*)
Available cordless
products**
Multi volt series, 18V product
Available charger
Sliding charger for lithium ion
batteries
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
3. Charger
Model UC18YSL3
Charging voltage 14.4 V – 18 V
Weight 0.6 kg
NOTE
Due to HITACHI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1-second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3 (on page 2).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1 )
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1 , according to the condition of the
charger or the rechargeable battery.
0000Book̲CH3656DA.indb 9 0000Book̲CH3656DA.indb 9 2017/11/14 15:24:11 2017/11/14 15:24:11