background image

7

  Stop the tool immediately if the blade stalls against a too 

heavy branch. Do not allow the motor to seize up as it 

could damage the motor. 

  Use a sturdy ladder or step ladder when cutting tall 

garden trees. 

  Use only for cutting shrub.

NOTE

  Lubricate (using sewing machine oil, mineral oil, etc.) 

the blade before starting and then every hour. Use an 

adequate amount of oil and wipe away excess oil. 

  During work (for example, when taking rests) do not 

leave the tool in a place exposed to direct sunlight or 

high temperature. This will prevent proper cooling and 

could result in damage. 

  Do not use the tool for work that exceeds its capacity. 

Such operation could cause the motor to lock up or slow 

down and will damage it. 

  Do not use the tool for cutting the lawn or weeds. Grass 

or weeds could stick to the blade. 

  Cut thick branches by gently pressing the blades against 

the branch. 

PRECAUTIONS FOR BATTERY AND 

CHARGER

1.  Always charge the battery at an ambient temperature of 

-10–40°C. A temperature of less than -10°C will result in 

over charging which is dangerous. The battery cannot be 

charged at a temperature greater than 40°C.

  The most suitable temperature for charging is that of 

20–25°C.

2.  Do not use the charger continuously.

 

When one charging is completed, leave the charger for 

about 15 minutes before the next charging of battery.

3. Do not allow foreign matter to enter the hole for 

connecting the rechargeable battery.

4.  Never disassemble the rechargeable battery or charger.

5.  Never short-circuit the rechargeable battery.

  Short-circuiting the battery will cause a great electric 

current and overheat. It results in burn or damage to the 

battery.

6.  Do not dispose of the battery in 

fi

 re.

 

If the battery is burnt, it may explode.

7.  Using an exhausted battery will damage the charger.

8.  Bring the battery to the shop from which it was purchased 

as soon as the post-charging battery life becomes too 

short for practical use. Do not dispose of the exhausted 

battery.

9.  Do not insert objects into the air ventilation slots of the 

charger.

 

Inserting metal objects or 

fl

 ammable into the charger air 

ventilation slots will result in an electrical shock hazard or 

damage to the charger.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the 

protection function to stop the output.

In the cases of 1 to 3 described below, when using this 

product, even if you are pulling the switch, the motor may stop. 

This is not the trouble but the result of protection function.

1.  When the battery power remaining runs out, the motor 

stops.

 

In such a case, charge it up immediately.

2.  If the tool is overloaded, the motor may stop. In this 

case, release the switch of tool and eliminate causes of 

overloading. After that, you can use it again.

3.  If the battery is overheated under overload work, the 

battery power may stop.

  In this case, stop using the battery and let the battery 

cool. After that, you can use it again.

Furthermore, please heed the following warning and caution.

WARNING

In order to prevent any battery leakage, heat generation, 

smoke emission, explosion and ignition beforehand, please 

be sure to heed the following precautions.

1.  Make sure that swarf and dust do not collect on the 

battery.

  During work make sure that swarf and dust do not fall on 

the battery.

  Make sure that any swarf and dust falling on the power 

tool during work do not collect on the battery.

  Do not store an unused battery in a location exposed to 

swarf and dust.

  Before storing a battery, remove any swarf and dust that 

may adhere to it and do not store it together with metal 

parts (screws, nails, etc.).

2.  Do not pierce battery with a sharp object such as a 

nail, strike with a hammer, step on, throw or subject the 

battery to severe physical shock.

3.  Do not use an apparently damaged or deformed battery.

4.  Do not use the battery in reverse polarity.

5.  Do not connect directly to an electrical outlets or car 

cigarette lighter sockets.

6.  Do not use the battery for a purpose other than those 

speci

fi

 ed.

7.  If the battery charging fails to complete even when a 

speci

fi

 ed recharging time has elapsed, immediately stop 

further recharging.

8.  Do not put or subject the battery to high temperatures or 

high pressure such as into a microwave oven, dryer, or 

high pressure container.

9.  Keep away from 

fi

 re immediately when leakage or foul 

odor are detected.

10. Do not use in a location where strong static electricity 

generates.

11. If there is battery leakage, foul odor, heat generated, 

discolored or deformed, or in any way appears abnormal 

during use, recharging or storage, immediately remove it 

from the equipment or battery charger, and stop use.

12. Do not immerse the battery or allow any 

fl

 uids  to 

fl

 ow 

inside. Conductive liquid ingress, such as water, can 

cause damage resulting in 

fi

 re or explosion. Store your 

battery in a cool, dry place, away from combustible and 

fl

 ammable items. Corrosive gas atmospheres must be 

avoided.

CAUTION

1.  If liquid leaking from the battery gets into your eyes, 

do not rub your eyes and wash them well with fresh 

clean water such as tap water and contact a doctor 

immediately.

 

If left untreated, the liquid may cause eye-problems.

2.  If liquid leaks onto your skin or clothes, wash well with 

clean water such as tap water immediately.

 

There is a possibility that this can cause skin irritation.

3. If you 

fi

 nd rust, foul odor, overheating, discolor, 

deformation, and/or other irregularities when using the 

battery for the 

fi

 rst time, do not use and return it to your 

supplier or vendor.

WARNING

If an electrically conductive foreign object enters the 

 

terminals of the lithium ion battery, a short-circuit may occur 

resulting in the risk of 

fi

 re. Please observe the following 

matters when storing the battery. 

 

Do not place electrically conductive cuttings, nails, 

steel wire, copper wire or other wire in the storage 

case. 

 

Either install the battery in the power tool or store 

by securely pressing into the battery cover until the 

ventilation holes are concealed to prevent short-

circuits (See Fig. 2).

0000Book̲CH3656DA.indb   7

0000Book̲CH3656DA.indb   7

2017/11/14   15:24:10

2017/11/14   15:24:10

Содержание CH 3656DA

















Отзывы: