Hitachi CG2143S, Инструкция по эксплуатации

Страница: 16 / 18

GB
- 15 -
• Press “ ” button to move the Teletext screen forward one
page at a time.
• Press “ ” button to move the Teletext screen backward one
page at a time.
For Fastext
The subject-heading for the information may have a particu-
lar colour.
• Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
but-
ton in order to reach the relevant page quickly.
To exit Teletext
• Press “
TV
” button. The screen will switch to TV mode.
To Display the Time
• While watching a TV programme with Teletext transmission
press “
” button. The current time information, captured
from Teletext will be displayed at the upper middle of the
screen for 5 seconds.
• If the programme being watched does not have Teletext trans-
mission, no iformation will be displayed.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not use
abrasive solvents as they may damage the TV screen coating
layer
Poor Picture
Have you selected the correct TV system? Is your TV set or
house aerial located too close to the loudspeakers, non-
earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures or
ghost images. Sometimes you can improve the picture qual-
ity by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you have
entered the correct frequency.
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, discon-
nect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
No Picture
means that your TV is not receiving any transmis-
sion. Have you pressed the correct keys on the remote control?
Try once more.
Sound
You can not hear any sound. Did you perhaps interrupt the
sound, pressing “ ” key?
Sound is coming from only one of the speakers. Is the balance
set to one direction extreme? See SOUND menu.
Remote Control
Your TV no longer responds to the remote control. Press the
“
TV
” button on the remote control once more. Perhaps the
batteries are exhausted. If so you can still use the local keys
at the front of your TV.
Have you selected the wrong menu? Press “
TV
” key to return
to TV mode or press “ ” to return to the previous menu.
No solution
Switch your TV set off and on. If this does not work, call the
service personnel; never attempt to repair it yourself.
01-ENG-(CG2143S)-2172H-AV-3040-AK30-ST7P-PLL-FS-BG-50050789.p65 13.07.2004, 13:26 15