Hitachi C32WF810N, Руководство пользователя

Страница: 31 / 52

31
sleep
timer
and
default
viewing
controls
television
features
...notes on Default Zoom
Various broadcast stations now transmit WSS (Wide Screen Signals) which identifies the picture format
movies and programs are broadcast in. Your TV can detect these Wide Screen Signals and automatically switches
your TV to the correct format (when in AUTO mode). However, some broadcasters do not transmit this WSS, and
so your TV will not recognise which format is being transmitted. Therefore, DEFAULT ZOOM is used to choose your
picture requirements when a Wide Screen Signal has not been sent or has not been detected.
...notes on Default 4:3
If your TV is receiving a 4:3 Wide Screen Signal, the viewing format displayed can be set using the default 4:3 .
...notes Auto WS Detect
Auto Wide Screen Detect, when switched ON (and there is no WSS signal) enables your TV to look for the
black bands at the top and bottom of the broadcast received and expands the picture in the appropriate aspect
ratio. If this is set to ‘OFF’, these black bands cannot be detected. Therefore the picture format will revert to the
setting specified in the DEFAULTZOOM option if there is no WSS signal.
When watching some programs with Auto WS Detect ON, the C16:9L mode may result in unnecessary cropping at
the top and bottom of the picture resulting in lost subtitles etc. To overcome this, please use the 16:9 or subtitle
button on your handset.
When using external equipment with on-screen displays, incorrect operation of the Auto WS switching may occur
while performing certain operations. For example, while watching a 16:9 cinema scope format film on a DVD player,
pressing the pause button may result in the TV switching from the C16:9L mode to the default zoom. Visual forward
and rewind operations may result in similar results. This action will also show your DVD players software menus on
your television screen. This is normal operation.
Note: If you can see the screen format changing frequently after setting to ‘ON’ mode, set Auto WS Detect option to
‘OFF’ to stay at one fixed aspect ratio.
Use up/down cursor buttons to select
option to adjust.
Once highlighted, accept selection - when you turn your TV off, the TV will
memorise your adjustments
Press the MENU button to obtain
MAIN MENU.
Press the cursor down button to select
FEATURES.
Once highlighted, accept selection.
1
2
3
4
6
Use right/left buttons to adjust chosen
feature.
5
...notes on Default features
Your TV also has default features which can control the viewing format of your TV’s picture.
See above for entry into and adjustment of these features.These features and their settings will only be effective if
the widescreen picture format is set to AUTO.
...notes on Sleep Timer
This feature is used to automatically place your TV into standby mode after a set number of
minutes - use the right/left cursor buttons to set the timer between 5 and 120 minutes.When the timer
has only a minute left this will be shown on the screen as a countdown from 59 seconds to zero, after
which your TV’s status will be standby.