On/off
Switch
Headphone
Socket
S-VHS
Socket
Audio/Video
Input Sockets
/-
Buttons
InfraRed
lens
TV Mode
Light
P+/P-
Buttons
MENU
Button
F R O N T C O N T R O L PA N E L
Access to the front control panel is gained by pushing the door in
and releasing. The front control panel contains items such as the
Headphone socket, Audio/Video sockets, Pro /- and
/- buttons. Also located on the front are the ON/OFF
button, Infra Red Lens and TV Mode Light.
TV Controls Overview
TV Controls Overview
REAR CONNECTING S O C K E T S
The rear of your TV contains an aerial RF input and two scart
sockets, AV1 and AV2. The RF/ aerial socket is
permanently connected to an RF source i.e. an aerial antenna
shown in TV Installation section . The scart sockets are used to
connect external equipment such as VCR s, Satellite Receivers /
Decoder etc. Connection of this equipment is explained in greater
detail in the Connecting of External AV Equipment section of
this manual. Also located on the rear of the TV are the Audio
Sockets and the *18 Volt Output socket.
Consult your HITACHI dealer with regards to purchasing
HITACHI auxiliary equipment.
2 x 12W 8
L
R
RF Aerial
Input Socket
Scart Socket
AV1
Scart Socket
AV2
*18V Output
Socket
Audio Output
Sockets
External Speaker
Sockets
2 x 12W 8
L
R
SWITCHING O N
To switch your TV on, press the ON/OFF button shown above. If the TV fails to display anything on the screen, but the red TV mode light
appears bright, then the TV is in Stand by mode. Press the Stand by button on your handset to
activate the TV. The red TV mode light will then dim and you should allow the TV a few seconds for a picture to appear.
6
6
* IF FITTED
*
*
*IMPORTANT NOTE The 18 Volt Output socket is used for connection of HITACHI
auxiliary equipment only and under no circumstances should be connected to other
external equipment. Failure to observe this may result in serious damage to your equipment.
*
** IF FITTED
Содержание C28W433N
Страница 1: ...C28W433N C32W433N User Guide ...
Страница 31: ...Notes Notes ...