Hitachi C28W433N, Инструкция по эксплуатации

Страница: 10 / 32

Manual T
Manual T
uning cont.
uning cont.
When AV sockets are commonly used, for example, if you view camcorder recorded events
frequently, then we suggest assigning a dedicated program number on your TV. This can
be any program number that has not already been assigned. Follow the step by step guide
below.
Assigning A
Assigning A
V Prog. N”s
V Prog. N”s
Broadcasting stations transmit the signal to your TV on a particular defined frequency i.e.
525.25MHz. These frequencies can be entered manually if known, and you can obtain this
information by calling your local operator. In addition to frequency transmission a corresponding CHANNEL N” is also used e.g. CH34, and this
too can be directly input to your TV if known. (The S-- number has no function on this TV).
10 10
AV2 assigned to Program 6
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
Use the left/right/up/down buttons to highlight the
frequency of the program number you wish to
enter.
Press the CH button on your handset
once - the column changes RED to
indicate selection.
1
3
4
Repeatedly press CH key to select CH- - or
---.--, and enter the known number using
0-9 keys.
Once the number has been entered, press the MENU
key once more and the display turns BLUE.
This is now stored. Press MENU to exit.
5
6
Repeat above to enter other AV sockets or
repeatedly press MENU button to store and
exit to TV mode.
6
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use the left/right/up/down buttons to
highlight the AV column of the program number you
wish to use.
3
Once highlighted press the CH
button to allow changes to be entered.
4
Select between each AV mode using the
left/right buttons
5
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
1
Entering Known Frequencies Entering Known Frequencies