Hitachi C14D24, Инструкция по эксплуатации

Страница: 19 / 53

GB - 18 -
To Stop Automatic Page Change
The teletext page you have selected may
contain more information than what is on the
screen; the rest of the information will be
displayed after a period of time.
• Press “
“ button to stop the automatic
page change.
• Press “ “ button again to allow the next
page to be displayed.
To Select a Subcode Page
Subcode pages are subsections of long
Teletext pages that can only be displayed on
the screen one section at a time.
• Select the required Teletext page.
• Press “
“ button.
• Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
• If the selected subcode page is not dis-
played in a short time, press “
“ button.
TV programme will be displayed on the
screen.
• Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
• Press “
“ button to display the selected
Teletext page.
Fastext
Your CTV supports the 7 page Teletext sys-
tem. When the page number of any of the 7
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically.
• Press “ “ button to move the Teletext
screen forward one page at a time.
• Press “ ” button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate
RED , GREEN , YELLOW
or BLUE button in order to reach the relevant
page quickly.
To exit Teletext
• Press “
79
” button. The screen will switch
to TV mode.
To Display the Time
• While watching a TV programme with Tele-
text transmission press “ “ button. The
current time information, captured from Tele-
text will be displayed at the upper middle of
the screen.
• If the programme being watched does not
have Teletext transmission, no iformation
will be displayed.
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different equipment should be
connected at the back or the front side of the
TV.
Via the Euroconnector
Your TV set has a Euroconnector socket. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnector, to
your TV, use SCART input.
If an external device is connected via Euro-
connector socket TV is switched to AV mode
automatically. If the signal is RGB then the
RGB OSD indicator is displayed on the
screen.
In AV mode if you press the “
INFO ” button the
TV status OSD is displayed on the screen.