
--- 20 ---
(4) Setting to cut crown moldings at positions and in Fig. 25 (See Fig. 31; tilt the head to the right.):
Turn the turn table to the left and set the miter angle as follows:
For 45˚ type crown moldings: 35.3˚ ( mark)
For 38˚ type crown moldings: 31.6˚ ( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45˚ type crown moldings: 30˚ ( mark)
For 38˚ type crown moldings: 33.9˚ ( mark)
Position the crown molding so that the lower surface ( in Fig. 24) contacts the fence as indicated in
Fig. 33.
(3) Setting to cut crown moldings at positions and in Fig. 25 (See Fig. 30; tilt the head to the right.):
Turn the turn table to the right and set the miter angle as follows:
For 45˚ type crown moldings: 35.3˚ ( mark)
For 38˚ type crown moldings: 31.6˚ ( mark)
Tilt the head to the right and set the bevel angle as follows:
For 45˚ type crown moldings: 30˚ ( mark)
For 38˚ type crown moldings: 33.9˚ ( mark)
Position the crown molding so that the lower surface ( in Fig. 24) contacts the fence as indicated in
Fig. 32.
1
4
2
3
B
1
Head
Miter angle scale
Bevel angle scale
Fig. 30
2
3
1
2
3
A
Fig. 31
Bevel angle scale
Turn table
Fence (A)
Miter angle scale
Fig. 32
Fig. 33
Fence
Table on base
Fence
Table on base
B
A
B
A
2
3
4
1
Base
Turn table
Base
Head
Fence (B)