Presetting Stations
The unit’s memory can store a total of 30 FM stations. Presetting allows you to tune in to a
station directly.
1. Tune in to a desired station and then press the ID3/MEM/C-ADJ. button. The preset
number will flash and the “MEMORY” indicator will show on the display.
2. Press the PRESET/FOLDER/ARROW buttons on the remote control to select the
preset number.
3. Press the ID3/MEM/C-ADJ. button on the remote control again to store it in the
memory.
4. Repeat steps 1-3 to store other stations.
• Storing a new station into a preset location will erase the previously stored station in that location.
• Power off will not erase the memory of preset stations. Perform the stations presetting procedures
again to store the stations.
• To erase all preset memory, tap and hold the
icon on the unit or press and hold the button
on the remote control in STANDBY mode. The standby LED and LCD will flash once.
• There are some preset stations in default setting, you can overwrite them anytime you want.
Tuning in to a Preset Station
Press the PRESET/FOLDER/ARROW buttons on the remote control to select a preset
number.
For Better Reception
Fully unwind the FM aerial. Extend the FM aerial and place it in the position that
sounds best.
Do not connect the FM aerial to an outside aerial.
28
GB
AXM845E_IB_GB_120510_candice.indd 28
10/05/2012 6:20 PM
