Hitachi AX-M68D, Руководство по эксплуатации

Страница: 17 / 20

- 16 -
CD Operation
CD Playing
1. Press the function button (FUNCTION) on the amplifier or CD function button (CD) on the remote
control to select CD function.
2. Press the open/close button to open the disc door and place the disc on the disc tray (with the
printed side up).
3. Press the open/close button to close the disc door, the unit will read the disc and play it
automatically.
4. Press the play/pause button to pause the playing, press the button again, it will be continue to play.
5. Press the stop button to stop the disc play.
Direct Select track
Load a disc, upon finishing reading the disc, you can select tracks by using number buttons (0/10,1-
9,10+) on the remote control and play.
Š
If the song number is less than 10, press the number buttons 1-9.
Š If the song number is over 10, press the 10+ button and then one of the number
buttons 0/10,1-9. Each press of 10+ increases the tens by 1 eg 10, 20, 30, so for track ‘22’ press
‘10+’ twice then ‘2’.
To Skip Search and Play
Š
Press the previous button once or more to skip to the beginning of the current track or
previous track.
Š Press the next button once or more to skip forward one or more tracks of the disc.
To Search
Press and hold the search backward button or search forward button to search for the position that
you intend to start playing.
Program Play
1. Insert a disc and press STOP when it starts playing.
2. Press the PROGRAM button (PRG.).
3. Press the NUMBER button (0/10, 1-9, +10) on the remote control to select the desired track number.
4. Repeat steps 2 and 3 until all required tracks are selected.
5. Press the PLAY/PAUSE button to start programme play.
6. Press the STOP button to stop the programme play. Press twice to clear program.
Random Play
You can have the selections or CD played in a random order.
Random play begins from the stop position by pressing the random button (RANM) on the remote
control.
Auto Tune
FM Search...