- 14 -
M
System Reset
If the
Menu
button is held down whilst the unit is powered on, then this is used to initiate a full
system reset.
The following message will be displayed for at least 3 seconds.
M
State Display (Tuned)
When a user has tuned to a station, the station details are recorded in persistent storage so that if the
radio is turned off and then on again, or an invalid preset or offair station is chosen, then the radio
can revert to the last station.
The standard tuned display is as follows
The FM in the top left corner, indicates that the radio is in FM mode.
M
AutoTune Button
This button (on the remote) activates the Auto Tune function which searches for the next
available FM station.
M
Menu Button
This button is used to enter the receiver configuration mode, AUTO or MONO. (AUTO will select
STEREO if available).
M
Select Up/Down Buttons (SEL-/SEL+)
These buttons are used to manually select new stations.
M
Storing Stations on Preset Buttons 0-9
If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to the
selected preset (in this example preset 4 is selected).
After 3 seconds the display reverts to the current display mode.
The bottom line of the display will show transmitted text if the station chosen transmits RTS.
System Reset
92.6MHz FM
Classic FM
Currently Playing
92.6MHz FM
Preset 04 Stored
