1. General information
Safety and applied symbols
SMGB0097 rev.0 - 07/2015
3
1
1.2 Safety and applied symbols
During normal system design work or unit installation, greater attention must be paid in certain situations requiring particu
-
lar care in order to avoid damage to the unit, the installation or the building or property.
Situations that jeopardise the safety of those in the surrounding area or that put the unit itself at risk will be clearly indicated
in this manual.
To indicate these situations, a series of special symbols will be used to clearly identify these situations.
Pay close attention to these symbols and to the messages following them, as your safety and that of others depends on it.
D A N G E R
• The text following this symbol contains information and instructions relating directly to your safety and phy-
sical wellbeing.
• Not taking these instructions into account could lead to serious, very serious or even fatal injuries to you and
others in the proximity of the unit.
• Hazards or unsafe practices which could result severe personal injury or death.
In the texts following the danger symbol you can also find information on safe procedures during unit installation.
C A U T I O N
• The text following this symbol contains information and instructions relating directly to your safety and physical wellbeing.
• Not taking these instructions into account could lead to minor injuries to you and others in the proximities of the unit.
• Not taking these instructions into account could lead to unit damage.
In the texts following the caution symbol you can also find information on safe procedures during unit installation.
N O T E
• The text following this symbol contains information or instructions that may be of use or that require a more thorough
explanation.
• Instructions regarding inspections to be made on unit parts or systems may also be included.
