English
- 15 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
It is recommended to use the TV’s USB input(s)
directly
if you are going to connect a USB hard disk.
Note:
:KHQYLHZLQJLPDJH¿OHVWKH
Media Browser
menu
FDQRQO\GLVSOD\LPDJH¿OHVVWRUHGRQWKHFRQQHFWHG
USB device.
Media Browser Menu
You can play photo
music and movie
¿
les stored on a
USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the
Menu
button while in the
Media
Browser
mode will access the
Picture
Sound
and
Settings
menu options. Pressing the
Menu
button
again will exit from this screen.
You can set your
Media
Browser
preferences by using the
Settings
menu.
Loop/Shuffle Mode Operation
Start playback with the
Play
button and activate
All
¿
les in the list will be
continuously played in original
order
Start playback with the
OK
button and activate
The same
¿
le will be played
continuously (repeat)
Start playback with the
Play
button and activate
All
¿
les in the list will be
played once in random order
Start playback with the
Play
button and activate
All
¿
les in the list will be
continuously played in the
same random order.
FollowMe TV (if available)
With your mobile device you can stream the current
broadcast from your smart TV using the
FollowMe
TV
feature. Install the appropriate Smart Centre
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note:
This application may not be compatible with all mobile
devices. Both of the devices must be connected to the same
network.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices
that are connected through HDMI ports by
using the remote control of the TV.
The
CEC
option in the
Settings>More
menu should
be set as
Enabled
at
¿
rst. Press the
Source
button
and select the HDMI input of the connected CEC
device from the
Sources List
menu. When new CEC
source device is connected
it will be listed in source
menu with its own name instead of the connected
HDMI ports name(such as DVD Player
Recorder
1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV via
the remote again
press
Quick Menu
button on the
remote
highlight the
CEC RC Passthrough
and
set as
Off
by pressing Left or Right button. This
feature can also be enabled or disabled under the
Settings>More
menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active
TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to
]
ero manually
if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device’s volume level
you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.
Note:
ARC is supported only via the HDMI3 input.
System Audio Control
Allows an Audio Ampli
¿
er/Receiver to be used with
the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the
Speakers
option in the
Settings>More
menu as
$PSOL¿HU
. The TV speakers will be muted and the
sound of the watched source will be provided from
the connected sound system.
Note:
The audio device should support System Audio Control
feature and
CEC
option should be set as
Enabled
.
