background image

14

AV1

AV2

RGB 1

RGB 2

AV3

MUTE

VOL

VOL

AV4

AUTO

PinP

OK

SIZE

RECALL

    MENU

ID

ID SET

OPERATING INSTRUCTIONS (continued)

Audio Mute

The audio volume can be temporarily mute by pressing
the MUTE button of the remote control.

• When a button is pressed, the volume adjustment

status guide (magenta) will be displayed.

• The volume setting can be lowered by pressing the VOL- button

while the audio is mute.

• The muting can be cancelled by pressing the VOL+ button or

MUTE button while the audio is mute.

When the MUTE button of the remote control is pressed
again, the audio will be restored and the volume display
(green) will appear.

MUTE button

Input Switching

• 

Input can be switched by pressing the RGB1, RGB2,
buttons of the remote control.

• 

Input can be switched in the sequence of RGB1 

RGB2 by pressing the INPUT SELECT button of the
monitor.

• When a button is pressed, the volume adjustment

status guide will be displayed.

• The volume will increase when the VOL+ (or 

) button is

pressed while the guide is being displayed.

• The volume will decrease when the VOL- (or 

) button is

pressed while the guide is being displayed.

Volume Adjustment

The volume can be adjusted by pressing the VOL+ and
VOL- buttons of the remote control (or the 

and 

volume buttons of the monitor unit).

 Volume 15

Volume setting value

Adjustment status guide display

VOLUME
UP/DOWN buttons

INPUT SELECT button

RGB buttons

Adjustment status guide display

(The display colour will change to magenta.)

VOLUME UP/DOWN
buttons

RGB1           RGB2

 Volume 15

Volume setting value

Содержание 42PMA300EZ














































Отзывы: