background image

4

ENGLISH

SAFETY PRECAUTIONS (continued)

WARNING

There is a risk of fi re, electric shock, or serious injury.

■ Do not place any objects on top of the unit.

Objects such as

 Liquid containers (vase, fi sh tank, fl owerpot, cosmetics or liquid medicine). 

 If water or any liquid spill onto the unit, it may cause short-circuit and result in fi re or electrical shock.

 In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.

 Do not place anything heavy on top of the unit.

 Do not climb on or hang from the unit. 

 Do not let your pets get on top of the unit

■ Do not expose this unit to rain or moisture.

 Never use this unit in the bathroom or shower room.

 Beware when you use this product outside, especially in rainy, or snowy weather, and at the beach or 

waterfront. 

 When the product gets wet, it could cause fi re or electrical shock.

■ Unplug this unit during lightning storm.

 To reduce the risk of electrical shock, do not touch the product when starts lightning.

■ Do not do anything that may damage the Power Cord.

 Do not damage, modify, twist, forcibly bend, heat, or pull excessively the Power Cord. 

 Do not place heavy objects (including the unit itself) on top of the Power Cord.

 If the Power Cord is damaged, contact your dealer for repairs or exchange.

■ Use only with designated power supply voltage.

 To prevent the risk of fi re and electrical shock, operate this product only with the power supply voltage indicated on the 

unit.

■ Beware not to drop or have any impact on the unit. 

 Take extra care while moving the unit.

 The plasma display panel is made of glass.  In case that it breaks, you may injur with the broken pieces.

 In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the Power Cord and contact 

your local dealer immediately.

 Continuing use of the product with above conditions would cause fi re or electrical shock. 

■ Clean dust or metals on or around the blade of the power plug regulary.

 Continuing use of the product with above condition may cause fi re or electrical shock.

 Always unplug the Power Cord fi rst, and clean the blade with dry cloth. 

■ Do not place the unit on an unstable surface.

Unstable places such as

 Sloped place or shaky rack, table, stand or trolly.

 If the unit falls down, it could cause personal injury.

Disconnect the

plug from the 

power outlet.

PW3-12th-P1-P24.indd   4

PW3-12th-P1-P24.indd   4

2005/11/09   9:45:43

2005/11/09   9:45:43

Содержание 42PD8800































































Отзывы: