31
OPERATING INSTRUCTIONS (continued)
Image Menu
TV/Video Mode
Selected characters
W
X
Setup
hint
Full 4:3 Standard
16:9 zoom Panoramic
4:3 Zoom
Available for
TV/Composite/S-Video/Component(480i/480p/576i/576p)
signals.
P. Size
Full
Component(720p/1080i)/HDMI
Adjust to preference. Please refer to 14 for more detail.
(Not available in Teletext mode)
Set Border Color
Black Gray
Adjust to when display 4:3 video.
This turns the gray sidebars to the black sidebars when watching
normal mode screen size area. It is always set to Off when the
monitor powered On. It is recommended to set to Gray to reduce the
panel image retention.
(Not available in Teletext mode)
Noise Reduction
Off Level1 Level2 Level3
Adjust to when display static image.
If this is set from Off to Level3, it helps to reduce the noise
interference visible on the static image, especially in the weaker
signal reception areas.
3:2 Pull Down
Disable Enable
Adjust to improve the picture quality.
Reset
(off the function)
-
The original factory settings for the items of this Menu page can be
restored by pressing the ENTER button.
PC Mode
Selected characters
W
X
Setup
hint
Slows the dot clock
phase (shifts slightly
to left).
Advances the dot
clock phase (shifts
slightly to right).
Clock Phase
Adjust for clear character visibility.
Reduces the dot clock
frequency (shrinks the
right side).
Increases the dot
clock frequency
(expands the right
side).
Horizontal Clock
Adjust for maximum character clarity.
Auto Adjust
(off the function)
-
Pressing the ENTER button, automatic regulation is started.
Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are
adjusted automatically.
