39
E
ngl
ish
França
is
SETTING UP YOUR DTV
To change password, enter the Change Password Number option in CHANGE PASSWORD function, press OK button to change
password. Enter four digital password in enter new password number. And then confirm the password by entering the same password
again.
This function allows to reset receiver back to factory default status.
1. Press
▲▼
buttons to highlight the “Reset Default”, and then press OK to into the
rating control menu.
2. There will pop up the RESET confirmation message “Press Yes will reset default
to default value”. Press OK on “Yes” to process. Press OK on “NO” to cancel the
setting.
CLOSED CAPTION
1. When you learn from the I-PLATE that there is Closed Caption data on the current channel, you can press
CC button on the remote control to display C.C. Option list it on the TV screen.
2. Use
▲
and
▼
keys to highlight the desired CC signal and press OK button.
3. After the type of Closed Caption has selected, press EXIT or CC key to cancel the CC Option list, then you
can watch this Digital TV program with Closed Caption.
FAVORITE CHANNEL LIST
1. When you are watching terrestrial or cable TV channels, you
can press “FAV” button on the remote control to call up the
Favorite List.
2. Use
W
and
X
keys to navigate “ALL”, “ATSC”, “NTSC” and
“FAV” program lists.
3. Use
▲
and
▼
keys to browse through the selected program
lists and highlight the program you like to watch, then press OK
button.
CARE OF YOUR HITACHI PLASMA DISPLAY
Change Password
Reset Default
NOTES:
1. Before you change the password, uses the default password “
0000
” to enter the Menu item which requires the
password.
2. If you forget the password, please use the password “
1688
” to enter.
3. To enter the new password, and follow the instruction.
NOTE: Press Numeric Key to Select Digital Channel
For the digital channel number is different with the traditional NTSC channel number. Please follow below indication to
select the digital channel if you prefer to use numeric key to do the channel selection.
Example: digital channel number: 10 - 2
1. press numeric key “1” and “0”
2. press “
X
“ buttons
3. press numeric key “2”
