10
HOOKUP CABLES
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.
300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an antenna
adapter (300-Ohm to 75-Ohm).
“F” Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the antenna
jack on the television.
Phono Connector (Provided)
Used on all standard video and audio cables which connect to
inputs and outputs located on the rear jack panel.
S-Video (Super Video) Connector (Provided)
This connector is used on camcorders, VCRs and laserdisc
players with an S-Video feature in place of the standard video
cable to produce a high quality picture.
Stereo Cable
This cable is used to connect from external audio out to the audio
input of the Plasma TV (ex. ANALOG RGB/DVI Audio Input).
DVI Cable
This cable is stands for Digital Visual Interface. Use for high
quality PC Display.
D-SUB MINI 15-Pin Cable (Provided)
This cable is used to connect a computer output to the D-SUB
input located on the rear panel of the Plasma TV. The resolution
should be set correctly to display the signal on the Plasma TV.
Optical Cable
This cable is used to connect to an audio amplifier with an Optical
Audio In jack. Use this cable for the best sound quality.
Subwoofer Cable
This cable is used to connect an external audio component input
to the subwoofer output of the Plasma TV.
