Hitachi 37LD8D20UA, Инструкция по эксплуатации

Страница: 19 / 44

English - 20 -
• The channel name is set using the
_
/
`
button to
display the channel which broadcasts the
programme.
• The start time, end time and date are each set with
the digit buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the re-
ceiver operates this event and is set with the
a
/
b
button to be either Once , Daily , or Weekly .
If an invalid number for the start or end times or the
date is entered, “Entered time is not valid” message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer ex-
pires, the TV switches to the channel which it is
switched from.
Selected digital channel will be output via Scart-2.
You should connect your VCR to Scart-2 for record-
ing digital broadcast.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
• Press the
"M" button to display the Main Menu and
use
a
/
b
button to highlight the Language line and
press the “SELECT” button.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
/DQJXDJH
796HWXS
&RPPRQ,QWHUIDFH
• Use the
a
/
b
button to highlight the soundtrack
language required and press the “SELECT” button.
Normal viewing, with the required language
soundtrack, can be resumed by pressing the "M"
button.
/DQJXDJHV
TV Setup
To be able to go through TV functions, you can use
this item.
The digital TV Setup menu screen is accessed from
the main menu. Press the "M" button to display the
main menu and use
a
/
b
button to highlight “TV
Setup” , press the “SELECT” button to display TV
Setup menu screen.
0DLQ0HQX
Detailed information about Sound, Picture and Fea-
ture menus are in AnalogueTV Menu System section
on page 21 .
Common Interface
• Press the "M" button to display the Main Menu and
use the
a
/
b
button to highlight the “Common
Interface” line and press the “SELECT” button.
0DLQ0HQX
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting.
Obtain the Conditional Access Module (CAM) and the
Viewing card by subscribing to a pay channel com-
pany, then insert those to the Television using the
following procedure.