Hitachi 37LD8D10, Инструкция по эксплуатации

Страница: 28 / 44

- 27 -
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show you
where the different (Optional) equipment
should be connected at the rear side of the
TV.
High Definition
Your Hitachi LCD Television is capable of
displaying High Definition pictures from de-
vices such as a High Definition Satellite Re-
ceiver or DVD Player. These devices must
be connected via the HDMI socket (AV-5) or
Component Socket (AV-3). These sockets
can accept either 720p or 1080i signals.
Via The Scart
LCD TV has 2 Scart sockets. If you want to
connect peripherals (e.g. video, decoder,
etc.) which have Scart sockets to the TV, use
SCART 1 or SCART 2 inputs.
If an external device is connected via the
Scart sockets, the TV will be switched to AV
mode automatically.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
Scart socket, you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1 .
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sock-
ets.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.
Copy Facility
Source selection for VCR recording.
• Select Feature menu.
• Select AV-2 Out by pressing _ / ` button.
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial socket
of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the Install menu and select search .
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
– Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.