Hitachi 37LD8D10 страница 42 Скачать руководство пользователя

Страница: 42 / 44

- 1 -

Installation Of The TFT TV To The Wall

To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).

Unscrew the 6 screws (M4 x 12) that attach the foot assembly to the TFT panel and re-

move the foot assembly from the TFT panel.

Decide the place on the wall where the TFT panel would be placed. Fix the

wall mounting

stencil

on the wall.

The stencil is used for placing the wall hangers on the wall, properly.

Level and mark with a pencil the 4 mounting points on each wall hanger.

Drill pilot holes for the plastic anchors (7x30) and then fix the wall hangers with 8 screws

(4 x 30).

Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging

screws at the rear of the TFT panel.

)LJXUH

IMPORTANT

1. Please follow the installation instructions carefully as failure to do so may result in injury or

damage to the set.

2. If you do not feel confident in carrying out the installation yourself, please ask a specialist

installer to carry out the installation for you.

3. The wall anchors provided are for solid (brick, concrete etc) walls only. For all other wall types

please obtain the correct fixings for the wall type from your hardware retailer. If you are unsure

which anchors to use, please seek professional advice.

4. To avoid potential injury it is advisable to have assistance from another person to carry out

this installation.

5. Hitachi assumes absolutely no responsibility for injuries or damages that may occur due to

improper installation and handling.

Содержание 37LD8D10













































Результаты поиска

Содержание 37LD8D10

Отзывы:

Похожие инструкции для 37LD8D10

Бренды по названию

Популярные бренды

Hitachi 37LD8D10, Инструкция по эксплуатации

Результаты поиска

Содержание 37LD8D10

Отзывы:

Похожие инструкции для 37LD8D10

Бренды по названию

Популярные бренды