Hitachi 32LD8700CA, Инструкция по эксплуатации

Страница: 26 / 48

- 25 -
AV-2 Out
By pressing
a
/
b
button, select AV-2 Out.
You can set AV-2 Out to TV, AV-1, AV-3,
AV-4, AV-5, PC RGB or DTT by pressing
_
/
` button.
Note: Only audio input is available for AV-3,
AV-5 and PC RGB. The other options have
both audio and video outputs.
Default Zoom
By pressing
a
/
b
button, select Default
Zoom. You can set Default Zoom to Pan-
oramic, 4:3 or 14:9 Zoom by pressing _ / `
button. If there is no WSS or aspect ratio
(picture size) information and zoom mode is
selected as
Auto by pressing the button,
then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 29 .
Blue Background
You can set the TV to automatically change
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
The
Blue Background feature can be turned
on or off by pressing _ / ` button.
Menu Background
By pressing
a
/
b
button, select Menu
Background. You can change menu back-
ground to Translucent or Opaque by press-
ing _ / ` button.
Menu Timeout
By pressing
a
/
b
button, select Menu
Timeout. Press _ / ` button to change menu
timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
By pressing
a
/
b
button, select Teletext
Language. Press _ / ` button to change
Teletext Language to West, East, Cyrillic,
Turk/Gre or Arabic. This will normally be set
to West for Western Europe.
Install menu
By pressing _ / ` button, select the fourth
icon. Install menu appears on the screen.
Program
By pressing
a
/
b
button, select Program.
Press _ / ` button to select the program num-
ber. You can also enter a number via digit
buttons on the remote control. There are 100
program storage between 0 and 99.
Band
Band
can be selected either “C” or “S” by
pressing _ / ` button.
Channel
Channel
can be changed by
_
/
`
button or
Digit Buttons.
Colour System
By pressing
a
/
b
button, select Colour
System. Press _ / ` button to change the
colour system to PAL, PAL60, SECAM or
AUTO .
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
a
/
b
button, select Sound
System. Press _ / ` button to change the
sound system to BG, DK, I or L/L’ .
Fine Tune
By pressing
a
/
b
button, select Fine Tune.
Press _ / ` button to adjust the tuning.
1-ENG-3230W-HL02126 UK-32 INCH TFT (CHM)-PEU IDTV-NEW SOFT-50088657.p65 04.08.2006, 14:42 25