Hitachi 32LD8700CA, Инструкция по эксплуатации

Страница: 22 / 48

- 21 -
TV Setup
To be able to go through TV functions, you
can use this item.
The digital TV Setup menu screen is ac-
cessed from the Main Menu. Press the “ ”
button to display the Main Menu and use
or buttons to highlight “TV Setup” . Press
“OK” button to display TV Setup menu
screen.
Detailed information for all menu items is
in AnalogueTV Menu System section on
page 22.
Common Interface
• Press “ ” button to display the Main Menu
and use the or buttons to highlight the
“Common Interface” line and press “OK”
button.
0DLQ0HQX
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay
channel company, then insert into the Televi-
sion using the following procedure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to
the slot that is located in the terminal
cover at the left-hand side of the TV (from
front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
3. Connect the TV to the mains supply,
switch on and then wait for few moments
until the card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing “OK”
button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information:
Enter IDTV; press “ ” button, then highlight
Common Interface and press “OK” button.
• When no module is inserted, “ No Common
Interface module detected ” message ap-
pears on the screen.
• Refer to the module instruction manual for
details of the settings.
1-ENG-3230W-HL02126 UK-32 INCH TFT (CHM)-PEU IDTV-NEW SOFT-50088657.p65 04.08.2006, 14:42 21