Hitachi 3080 G1, Справочник по аппаратуре

Страница: 42 / 138

configuration. The 10 GbE ports operate at speeds of ten (10) gigabits per
second.
Do not use the 10 GbE cluster interconnect ports to connect to the customer
data network (also known as the public data network).
Figure 4 10 GbE cluster interconnect ports label
Once connected, each 10 GbE port has two indicator LEDs; one green and
one amber. These LEDs provide link status and network activity status
information as follows:
Status/Activity (per port) Meaning
Status Green
(on, not flashing) 10 Gbps link present
Green flashing 10 Gbps link standby in a redundant configuration
Green off No link
Activity Amber flashing Network activity
Amber off No network activity
10 Gigabit Ethernet customer data network ports
The 10 Gigabit Ethernet (GbE) customer data network ports are used to
connect the server or cluster node to the customer's data network (also
called the public data network). These ports may be aggregated into a 1, 2,
3, or 4 aggregated port.
See the Network Administration Guide for more information on creating
aggregations.
The 10 GbE ports operate at speeds of ten (10) gigabits per second. The 10
GbE ports use enhanced small form factor pluggable (SFP+) optical
connectors.
Note: The 10 GbE customer data network ports cannot be used to
interconnect cluster nodes.
Figure 5 10 GbE customer data network ports label
42 Hitachi NAS Platform server components
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference