Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the broadcast.
important note
start A.P.S. (Auto Programming System)
3
5
4
After
Automatic Channel Scan
process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and by using
or
button and
then press the
RED
or
OK
button
|
}
For details, please refer to the
Install Menu
section of the instruction book.
When the TV is turned on for the first time, the menu for the language selection
appears on the screen. The message “
Welcome please select your
language!
” is written in all language options sequentially in the menu on the
screen. By pressing
or
buttons highlight the language you want to set and
press
OK
.
After the language selection menu, the following message appears on the
screen. Do you want to start an automatic channel scan?
To start automatic search, select “
Yes
”
,
to cancel select
“
No
”
.
This process will
take a few minutes. To cancel searching, you can press “
MENU
” button at
any time during the process.
1
2
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
50
17
83
77
Содержание 19LD3560U
Страница 1: ...19LD3560UA Instructions for use GB ...