Hitachi 090001, Руководство оператора

Страница: 258 / 442

OPERATING THE MACHINE
5-38
Attachment
Example commercial attachment models (breakers and
crushers) for excavators are shown in the following table.
Among the crusher models, some models are heavier than
the recommended weight on the previous page. Before
installing them, sufficiently coordinate with the attachment
manufacturer.
Always contact your nearest Hitachi dealer before installing
attachments shown with this mark *.
When an attachment other than the standard bucket
is installed on the machine, the machine stability will
be different. If a heavy attachment is used, not only will
controllability be affected but also machine stability will be
reduced, possibly causing safety hazard. Thoroughly read
and understand the base machine operator's manual and
the attachment manual to prevent accidents.
Breaker ZX135US-5B
Maker NPK Okada Furukawa Mitsubishi Toukuu Matsuda
MONTABERT
STK Ranma
GERMANYKRUPP
Model GH-6 OUB308 HB10G MKB900 TNB7E THBB801 BRH625 SIB215 E-64 HM560CS
Weight kg 863 810 790 870 910 740 1000 900 1000 870
Flow Rate L/min 90 to 150 90 to 120 70 to 90 65 to 110 70 to 140 60 to 110 80 to 130 80 to 130 70 to 130 50 to 110
Operating
Pressure
MPa
(kgf/cm
2
)
15 to 17
(153 to 173)
11.8 to 15.7
(120 to 160)
13.7 to 15.7
(140 to 160)
13.7 to 16.7
(140 to 170)
11.8 to 16.7
(120 to 170)
13.7 to 17.6
(140 to 180)
11.3
(115)
13.7 to 15.7
(140 to 160)
13.2 to 14.2
(135 to 145)
11.8 to 16.7
(120 to 170)
Secondary
Relief Valve
Set Pressure
MPa
(kgf/cm 2 )
−
17.6
(180)
20.6
(210)
17.6
(180)
17.6
(180)
19.6
(200)
11.8
(120)
17.6
(180)
15.7
(160)
16.7
(170)
Breaker ZX225US-5B, 225USLC-5B
Maker NPK Okada Furukawa Mitsubishi Toukuu Matsuda
MONTABERT
STK Ranma
GERMANYKRUPP
Model
H-10XB OUB312B F22 MKB1500V TNB-14E THBB-1401 BRH501 SIB312 E-66 HM960CS
Weight kg
1450 1500 1550 1530 1550 1350 1350 1310 1300 1500
Flow Rate L/min 160 to 200
140 to 180 145 to 180 130 to 175 130 to 170 130 to 200 110 to 140 140 to 180 100 to 160 130 to 170
Operating
Pressure
MPa
(kgf/cm
2
)
11.7 to 13.7
(120 to 140)
13.7 to 16.7
(140 to 170)
15.7 to 17.7
(160 to 180)
14.7 to 17.7
(150 to 180)
12.7 to 16.7
(130 to 170)
15.7 to 17.7
(160 to 180)
7.8 to 10.8
(80 to 110)
14.7 to 16.7
(150 to 170)
13.2 to 14.2
(135 to 145)
11.8 to 13.7
(120 to 140)
Secondary
Relief Valve
Set Pressure
MPa
(kgf/cm
2
)
−
17.6
(180)
17.6
(180)
17.6
(180)
17.6
(180)
17.6
(180)
10.8
(110)
17.6
(180)
14.2
(145)
13.7
(140)
f
NOTE: Size change of return front piping may needed for some MONTABERT breaker. Consult your nearest Hitachi dealer.