- 7 -
3. DISASSEMBLY
(Model
：
RW46N1DSD
)
1. Remove the display board box Assy according
3-5
2. Separate the top plate of middle separator. (Figure 25)
Figure 25
3. Separate the LED light lead wire Housing. (Figure 26)
Figure 26
4. Loosen 3 screws. Pull out the bottom plate of middle
separator. (Figure 27)
Screw
Figure 27
Screw
5. Loosen
6 screws. Pull out the rear air duct cover. (Figure
28)
Figure 28
6. Separate the lead wire Housings. (Figure 29)
Figure 29
7. The upper Fan, Sensor & lower Fan, Sensor. (Figure 30)
lower upper
Sensor Sensor
Fan Fan
Figure 30
Yellow wire housing Red wire housing
