background image

                                                                                                                                                   

                         

 

Service manual   

Refrigerator (freezer)

                                                                   

 

Single door serial

 

 

3

1.Safety precautions 

Please read the following instructions before servicing your refrigerator. 

1)Check the refrigerator for current leakage.   

2)To prevent electronic shock, unplug before servicing. 

3)Always check line voltage and amperage. 

4)If you use any kind of appliance, check regular current. voltage and capacity. 

5)Don’t touch metal products in the freezer with wet hands, this may cause frostbite. 

6)Prevent water from following onto electric elements in the mechanical parts. 

7)When tilting the refrigerator, especially the thin plates(ex. Glass shelf or books). 

8)When servicing the evaporator, wear cotton gloves. This is to prevent injuries from the sharp 

evaporator fins. 

9)Leave the disassembly of the refrigerating cycle to a specialized service center. The gas inside 

the circuit may pollute the environment.

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание RS-11DC4S











Отзывы: