Reversing the door
The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires.
Tools you will need:
1. 8mm socket driver.
2.Phillips screwdriver.
3.Putty knife or thin-blade screwdriver.
Before you start, lay the refrigerator on it’s
back in order to gain access to the base. You
should rest it on soft foam packaging or
similar material to avoid damaging the cooling
pipes at the rear of the refrigerator.
1.Remove the upper hinge core, transfer it to
left side and tighten securely, then put the
in a safe place.
2. Remove both adjustable feet
、
the bottom
hinge bracket and the
by unscrewing the bolts. Then
the following
rubber supporting pad
3.
Replace the door by fitting the upper hinge
core into the upper door's hole, securing it
with the 2 screws. Replace the screw
covers.
Warning!
When changing the side at which the
door opens, the appliance must not be
connected to
Remove plug
from the
beforehand.
11
screw covers
re-attach them
according to
pictures.
electrical power.
power outlet
