Hisense RB325D4AB1, Руководство пользователя

Страница: 11 / 18

Operation
Starting up and temperature regulation
The temperature selector knob is located
on the top right of the refrigerator
compartment.
Setting 0 means:
Off.
Clockwise rotate the knob to turn on the
appliance
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Insert the plug of the connection lead into
. When
the refrigerator compartment door is
opened, the internal lighting is switched
on.After the fridge has been placed in
position,wait for
before electricity
is supplied.Don't store anything until the
temperature inside the fridge becomes
low enough.
an appropriately earthed socket
4hours
Important! Normally we advise you select
setting of 2 or 3 or 4, if you want the
temperature higher or colder please turn the
knob to warmer or colder setting accordingly.
energy efficiency.
Important! High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even non-stop!
Reason: when the ambient temperature is
high, the compressor must run continuously
to maintain the low temperature in the
appliance
Turning the knob to a warmer setting leads
to greater
11
3
4
5
Warning! If the light bulb is damaged
care must be taken when replacing
Changing the light bulb carry out by
inexperienced persons may cause injury or
serious malfunctioning. it must be replaced
by a qualified persons in order to avoid a
hazard. Contact your local Service Force
Center . if additional help is required
Before changing the light bulb, switch off
the appliance and unplug it, or pull the
fuse or the circuit breaker.
Light bulb data: 220-240 V,max.15W.
To switch off the appliance, set the
temperature regulator to position “0”.
Unplug the mains plug
To change the light bulb, undo the screw.
Press the light bulb cover and slide it
backwards.
Change the defective light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.
Changing the light bulb
Bulb
Bulb cover
Screw
Control Box
5
4
3