Hisense LHDN32V88MH, Руководство пользователя, Страница: 12 / 15

9
Connecting a AV receiver
Connecting using a digital audio cable
To connect using a digital coaxial cable:
1 Make sure that your TV’s power cord is unplugged and the AV
2
Connect one end of a digital coaxial audio cable (not included) to
the DIGITAL AUDIO OUT jack on the back of the TV.
3 Connect the other end of the audio cable to the digital coaxial
input jack on the AV receiver.
To play TV sound through a AV receiver:
1
Turn on the TV and select a program to watch.
2 Turn on the AV receiver and select the TV sound source,
then adjust the volume to a comfortable level.
Connecting headphones
Warning:
When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
Plug the headphones (not included) into the (headphone)
jack on the back of the TV.
Note : The TV sound automatically mutes when headphones are
connected period.
DIGITAL
AUDIO OUT
Back of TV
Back of TV
AV Receiver
Digital coaxial cable
HDMI3 HDMI2
COMP 2
HEADPHONE SERVICE
S-VIDEO
AUDIO OUT
VIDEO L R L R
AV
DIGITAL
AUDIO OUT
Y P
B
P
R
L R
HDMI1
Understanding the basics
1
Plug the power cord into an AC power outlet.
2 Press (power). Your TV turns on.
3
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
Understanding the basics
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT on the remote control or on
the TV. The INPUT SOURCE menu opens.
2 Press or to highlight the video source you want, then press
ENTER . Options include TV , AV , YPbPr1,YPbPr2, VGA (computer),
HDMI1,HDMI2,HDMI3,HDMI4,S-VIDEO.
.
Selecting a channel
Tip : If you are using a cable or satellite box, use the remote control that
came with that device to change channels.
To select a channel:
Press CH /CH to go to the next or previous channel.
Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
To select a digital channel, press the number buttons to
select the main digital channel, then press the dash(-). button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press
ENTER
to change the
channel.
Note:
Button presses must be within three seconds of each other.
Press
LAST
to go to the last channel viewed.
Press GUIDE to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER to
go to that channel.
Note
: If the list has more than one page, press or to scroll through
the pages.
Adjusting the volume
To adjust the volume:
Press VOL /VOL to increase or decrease the volume.
Press MUTE MUTE again
to restore the sound.
LHDN32V88MH / LTDN42V77MH