Hisense L1-04, Инструкция по эксплуатации

Страница: 7 / 96

Operation instructions
Indoor temperature
SMART button is ineffective in SUPER mode.
Target temperature
21
℃
or below 22
℃
26
℃
Over 26
℃
21
℃
-23
℃
23
℃
-26
℃
Your feeling
What you can do in SMART mode?
Button Adjust
Operation mode
HEATING
FAN ONLY
DRY
Room temperature
decrease 2
℃
after
operate for 3 minutes
COOLING
Uncomfortable because
of unsuitable air flow
volume.
Uncomfortable because
of unsuitable flow
direction.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, for the inverter you can choose from -7 to 7. if you still feel uncomfortable.
5
Heat pump models
Cooling only models
Indoor temperature Target temperature
23
℃
or below
26
℃
Over 26
℃
23
℃
-26
℃
Operation mode
FAN ONLY
DRY
Room temperature
decrease 2
℃
after
operate for 3 minutes
COOLING
How to set SMART mode?
Press the button.
SMART
Result : Enters SMART mode(fuzzy logic operation)
directly regardless of the unit is on or off.
Temperature and fan speed are automatically
set based on theactual room temperature.
How to cancel the SMART mode?
Press the button.
MODE
Result :
Indoor fan speed alternates among Higher, High,
Medium, low and Lower each time when this button
is pressed.
Press it once, the vertical adjustment louver(horizontal
adjustment louver) swings to change vertical airflow
direction(horizontal airflow direction). Press it again,
the swing stops.
The SMART mode will be cancelled.
Press MODE button cancel SMATR mode.
MODE SMART
TEMP.
PRESS
MODE SMART
TEMP.
PRESS
FAN SPEED
SMART mode( ) invalid for multi system SMART mode( ) invalid for multi system