Hisense KF-2302GWE, Инструкция по эксплуатации и монтажу

Страница: 14 / 43

11
Operation Guide
Adjusting the Airflow Direction
1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes wit your hands to the left or right.
2. Vertical
The vertical airflow can be adjusted by moving the flap with the remote control unit. Do not
move the flap with your hands. Confirm that the remote control unit has been turned on. Then,
use the FLAP button to set either the sweep function or one of the six airflow direction
!
CAUTION
Use the FLAP button on the remote control to adjust the position of the flap. If you
move the flap by hand, the flap position according to the remote control and the
actual flap position may no longer match. If this happens, shut off the unit, wait
for the flap to close, and then turn on the unit again; the flap position will now
be normal again.
Do not have the flap pointed down during cooling operation. Condensation may begin
to form around the air vent and drip down.
!
CAUTION
When the humidity is high, the vertical vanes should be in the front position
during the cooling or dehumidifying operation. If the vertical vanes are positioned
all of the way to the right or left, condensation may begin to form around the air
1
2
3
4
5
6
FLAP MODE
FAN SPEED
SLEEP
ON
OFF
SET CANCLE
BATTERY
A/C SENSOR ACL
A
U
T
O
SWEEP
A. Sweep function B. Automatic Function
The flap starts moving up and down to
deliver air over the sweep range. The flap moves up and down automatically
from to station.
6 3
NOTE
The flap automatically closes when the unit is off.