- 6 -
Preparation for using your new TV
Connecting to a Computer
You can use your TV as a monitor/speaker for your computer by connecting through its 15pin standard RGB
interface and PC audio interface. Connect the devices as shown below.
SCART1
ANT IN
75
RS-232C
B
R
AUDIO/L AUDIO/R
COMPONENT IN
VGA IN
PC
AUDIO
INPUT
HDMI IN
To speaker
To VGA
Audio line
RGB line
PC/NB
Connecting to an antenna
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not
supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be
used. The exact type and location of the antenna will depend on your particular area. Consult your local dealer or
service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor antenna is
not needed. Connect the equipments as the following
fi
gure.
ANTENNA SOCKET
ANT 75
Ω
Plug (not supplied)
COAXIAL CABLE (75
Ω
)
Adaptor (not supplied)
TWIN-LEAD FEEDER
(300
Ω
)
The signal comes from:
An outdoor antenna
An indoor antenna
CATV
net
Loosen the screw Insert the feeder in Tighten the screw
