- 10 -
Using the TV features
Select channels by [CH+] or [CH-]
You can also use [CH+] or [CH-] button to select channels. [CH+] indicates channel number increase; [CH-]
indicates channel number decrease.
Select channels by numbers
To select a channel: Press the channel numbers in series to select channel directly.
For example, to select channel 120, Press the button [1], and 1 will display on the top right corner of the screen,
then press the button [2], 12 will display, press the button [0], you can enjoy the program of channel 120.
Notes:
1) When you are changing the channel, the sound state graphics can be displayed below the channel number.
There are 3 sound states in this TV. If the sound is mono, the graphics is
; If the sound is stereo, the graphics
is
; If the sound is NICAM dual I/II, the graphics is
. There are two symbols at right of the sound
state graphics, which indicate preset of picture system and sound system.
2) When you are changing the channel, the sound of current channel will be
fi
rstly changed to stereo or NICAM
dual I according to the sound state of current channel. You can press the [
] button on the remote control to
change current sound type.
Adjust volume
When menu is not displayed on the screen, press [VOL+] or [VOL-] button to adjust the volume.
Use [Recall] button
Press the [Recall] button repeatedly to alternate between the present channel and the previous channel.
Display channel number
Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your
pressing.
Select picture modes
You can select the picture mode from among three preset modes and one user-set
mode. Press the [P.Mode] button repeatedly to select the desired picture mode.
Select sound modes
You can select the sound mode from among
fi
ve preset modes and one user-set
mode. Press the [S.Mode] button repeatedly to select the desired sound mode.
Use [Still] button
Press the [Still] button to snapshoot the present picture, and press again to return
to normal watching.
Use [Aspect] button
Press the [Aspect] button to adjust the screen aspect ratio and zoom ratio.
Mute function
Press [Mute] button repeatedly to switch between mute and unmute mode.
Normal
Bright
Soft
User
Normal
Speech
Theater
Stadium
Music
User
