11
Removing a micro SD card
1.
Touch the Tray button in the notification area in the lower-right corner of the screen.
2.
Touch
Safely Remove Hardware
.
3.
Touch
Eject XXXX SD Card
. A message appears confirming that the micro SD card
can be safely removed. If a warning message appears stating the micro SD card cannot
be removed, ensure all data transfers involving the micro SD card are complete.
4.
Press on the micro SD card to release it.
5.
Slide the card out after it pops out from the micro SD card slot.
Caution:
Removing the micro SD card while it is in use may cause data loss or result in appli-
cation errors.
Make sure all save operations to the micro SD card are complete
before removing the
micro SD card.
Caution:
Do not insert or remove card while the device is turned on. It may damage the card
and device.
Connecting the Base Connector
1.
Place the base connector on an even plane like the top of a desk
2.
Connect the tablet to the base connector, aligning the Pogo pin jack and the positioning
slots.
3.
To separate the tablet from the base connector, hold the base connector with one hand,
then grab the top edge of the tablet and drag it apart.
Содержание HM628N
Страница 1: ...1 Tablet POS HM628N User Guide ...
Страница 13: ...13 ...