Hisense HCCS-H64H2C1M Скачать руководство пользователя страница 11

    

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

    

Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment.

    

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

    

—Reorient or relocate the receiving antenna.

    

—Increase the separation between the equipment and receiver.

    

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

    

—Consult the dealer or an experienced radio/TV technician for help.

    

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between 

the antenna of this device and persons during device operation.

    

To ensure compliance, operations at closer than this distance is not recommended.

ISED Regulatory Compliance

    

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and 

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 
(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the 

device. 

    

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, 

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. 

L’exploitation est autorisée aux deux conditions suivantes : 

1) L’appareil ne doit pas produire de brouillage; 

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.

    

This equipment complies with IC RSS

102 radiation exposure limits set forth for an uncontrolled 

environment. This equipment should be installed and operated with minimum distance 20cm between the 

radiator and your body.

    

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR

102 établies pour un 

environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20cm 

entre le radiateur et votre corps.

Содержание HCCS-H64H2C1M













Отзывы: