Hisense H610BS RD-60WC4SZA, Руководство пользователя

Страница: 11 / 16

crisper cover
Humidity control
crisper
Installation bracket
Ice box
Twist ice tray
Middle freezer drawer
catch
the shelf back into the position.
All the door racks and covers are completely
removable for cleaning.
Crisper and Humidity control
The crisper, mounted on telescopic
extension slides, is for storing vegetables
and fruits. You can adjust the humidity inside
by using the sliding block.
The sliding block on crisper cover can
slide to left or right and the air hole become
more or less relatively. More air hole
opening means less humidity and less
means more humidity.
We recommend that you store vegetables
with more humidity and fruit less humidity.
When you remove the crisper, pull them
forward, then lift the crisper off the slides.
Remember to empty food in the crisper
firstly. Once you have removed the drawers,
ensure the slides are pushed back fully.
Bottle holder operation
The bottle holder can be used to fix the
bottle. You can place it on the middle or
lower door rack and slide to left or right as
your prefer.
3. Using your freezer chamber
The freezer chamber is suitable for storage
of foods required to be frozen, such as
meat, ice cream and others.
Caution! Never close the freezer door while
the drawers, installation bracket, ice tray,
and/or telescopic slides are extended. It may
damage both them and the refrigerator.
Ensure that drink bottles are not left in the
freezer for a longer time than needed as
freezing liquid may cause the bottle to
break.
Installation bracket
The installation bracket is located under the
top of the freezer chamber. In order to get
more space in the freezer, you can remove
the installation bracket.
When removing the bracket, you can pull
out the twistable ice tray and the upper
freezer drawer, lift both the two catches on
the left and right underside, and pull it
forward until the bracket break from the
three circular attachments. Then you should
bend it at one side, slip it from the guide and
finish removing the bracket.
Twistable ice tray
The twistable ice tray is used to make and
deposit ice cubes. You should use it as
follows.
1.Pull out the twistable ice tray from the
installation bracket.
2.Fill the drinking water inside (do not fill
above the max water level).
3.Place the filled ice tray back to the
bracket.
4.Await for around 3 hours, twist the knobs
clockwise and the ice will drop into the ice
box below.
Drawers
The drawers, mounted on telescopic
extension slides, can be used to store rather
more food. But the upper drawer is only for
Hisense Refrigerator
10