o Place a bracket onto each corner, ensuring that the outer hole lines up with the hole on the
corner of the hob.
o Fasten the bracket to the corner of the hob with a screw.
o Place the long screw into the fixing hole on the outer edge of the bracket but do not fully
tighten.
o Carefully turn the cooktop back over and then gently lower it into the aperture hole that
you have cut out.
o When the hob is correctly positioned, tighten the long screws to fix the hob securely in the
aperture hole. These screws MUST be securely tightened.
(
A)Bracket
(B)Screw
(C)Sealing strip
IMPORTANT:
There are ventilation holes around the outside of the
hob. YOU MUST ensure that these holes are not blocked by the
worktop, when you put the hob into position (see drawing
opposite).
o Carefully turn the hob upside down and place it on a cushioned
mat.
o The supplied brackets need to be fitted to each of the four corners
on the underside of the hob.
10
