Hisense H230RRE-WD, Руководство пользователя

Страница: 13 / 69

y
Before using
Please clean the water dispenser parts
before using this appliance for the first
time.
1. Hold two sides of the water storage box
tightly, then lift it up and put it out carefully.
2. Unscrew the head in counterclockwise,
then wash the head, water storage box
and cover (including large lid and small lid)
lightly (especially interior) with clean water.
3. Dry it in natural way or using a dryer.
Lar ge lid
Water stor age box
Head
S mall lid
y
Assembling
After cleaning, please assemble these
parts together, with reverse sequence of
cleaning procedure; and then fit them on
the door according to the following
procedure.
(1) check sealing washer before fitting on
water storage box, if the washer was
extruded out from fix holder, set it clingy
into the hole;
(2) ensure that the head be inserted into
the hole first;
then hold two sides of the water storage
box (3); and press it down until you hear a
click sound (4).
sealing
washer
fix holder
y
Filling water
Before filling water, make sure that water
storage box part is steady and in correct
position.
To prevent from water overflowing or
spilling, fill with water below
WKH³0D[´OLQH
which is approximately about 2.0L
(suggested volume).
The following two ways were
recommended to fill water.
1. Uncover the small lid (counterclockwise)
and fill water through the inlet of large lid.
2. Uncover the water storage box cover
(from corner) and fill water directly.
Large lid
Water storage box cover
S mall lid
Schem e 2
Scheme 1
12