cross
screwdrawer
rubber supporting pad
screw
First use an installation
2.Put screw into the hole of rubber
supporting pad.
3.Make screw in alignment with the hole on
lower base cover . Fasten rubber supporting
pad to the base cover firmly by a cross
screw driver (self-provided).
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be in stable contact with
the floor. You can also adjust the level by
unscrewing the appropriate level
adjustment in the front (use your fingers or
a suitable spanner).
Leveling
Caution!
Any electrical work required to
install this appliance should be carried out by
qualified or authorized personnel.
Warning!
This appliance must be grounded.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical connection
10
Содержание BC-169
Страница 1: ......
Страница 19: ......
Страница 24: ...This refrigerating appliance is not intended to be used as a built in appliance ...
Страница 121: ......