Hisense 65WR6BE, Руководство пользователя, Страница: 24 / 76

21
Vision Board WR6BE User Manual
Making Connections
Enter the Settings menu and select the Network item.
WIFI
The device can receive network signals directly through a Wireless router
• The available wireless network list is automatically displayed when WIFI is selected.
• Select an available network, enter the password, and tap Connect. If the selected network is
not encrypted, the device can connect directly.
• If the required network is not displayed in the list, tap Refresh to display more networks. If the
network SSID is still not displayed after this operation, tap Add Network and enter the network
name manually, select the corresponding encryption method according to router settings, enter
the password, and tap Confirm.
Ethernet
• Ethernet: auto
The device automatically obtains an IP address and connects to the network. If the IP address
fails to generate or does not allow connection to the internet, repeat the operation again or
choose Ethernet: manual.
• Ethernet: manual
Manually enter the IP Address, Subnet Mask, DNS Server and Gateway.
Wireless router
Network port
Network port
in the wall
Device port
Router
Network port output Network port input
Network port
in the wall
Connecting to a network
Connecting to the OPS interface device
OPS (Open Pluggable Specification) is the interface specification developed by INTEL which
is applicable to embedded computer module products. With this interface, the screen can be
connected to the device in compliance with OPS interface specification, which is short for OPS
module. Recommended adaptable OPS modules are S02BDS58811E, S02BDS5A811E and
S02BDS7AA21E, available separately as accessories.
This product can provide the OPS module with 19V±0.5V (3.4A MAX) power supply.
NOTE
After installing the OPS module, when the signal source is in the OPS source channel, the
device touch screen regards OPS as the touch unit by default. After the TOUCH cable is
connected with an external computer, the external computer is used as the touch unit. At this
time, the signal source should be switched to the channel of the external computer for using
the touch functionality.
It is recommended to choose and purchase OPS already certified by Hisense, with the i5/i7
latest generation processor, 4G memory, 128 GB solid state drive or above.