Hisense 65B4E30T, Руководство пользователя

Страница: 15 / 39

7
Parts and Functions
2.3.2. Inserting the Batteries in the Remote Control
The remote control is powered by two 1.5V AAA batteries.
To install or replace the batteries:
1. Press and then slide the cover to
open it.
2. Insert the batteries with the correct
polarity (+) and (–).
3. Replace the cover.
CAUTION:
Incorrect use of batteries may cause leakage or explosion. Be sure to follow the
instructions below:
• Insert “AAA” batteries with the correct polarity (+ and -).
• Do not mix battery types.
• Do not use a new battery with a used one together. Otherwise, it may cause
leakage or shorten the life of the batteries.
• Remove the dead batteries immediately to avoid battery leakage in the battery
compartment. Do not touch exposed battery acid, as it may cause injury to your
skin.
NOTE:
Remove the batteries from the battery compartment when not using for an extended
period of time.
2.3.3. Handling the Remote Control
• Do not drop or apply shock to the remote control.
• Do not allow any liquid to get inside the remote control. If water has entered the
remote control, wipe the remote control with a dry cloth immediately.
• Do not place the remote control near heat and steam sources.
• Do not attempt to disassemble the remote control, unless you need to place
batteries in the remote control.
2.3.4. Operating Range of the Remote Control
Point the top front of the remote control to the
remote sensor on the display when you press
the buttons.
NOTE:
The remote control may not function properly
when the remote control sensor on the display
is under direct sunlight or strong illumination,
or when there is an object between the remote
control and the remote sensor of the display.