Hisense 43N6, Руководство пользователя, Страница: 8 / 26

6
To turn your TV on or off :
1. Plug the AC power cord into a socket outlet of AC power supply.
2. When the TV is powered on, press the [ ] button on the remote control, to turn TV on or off.
1.1
Turning your TV on or off
NOTES
When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the mains plug from the mains socket.
If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [
INPUT
] button on the remote, the list of Source appears.
2. Press the [
/ / < / >
] buttons to select the input source
.
3. Press the [
OK
] button to confirm your selection.
1.2
Selecting the Input Source
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more
information.
1.3
Using the Live TV
To view broadcast programs, press the [ Live TV ] button on your remote.
Channel search guide
When switching to Live TV, the TV detects the presence of the channel list information (Channel scan must
have been completed). If the scan has not yet been completed, a prompt will appear to begin scanning for
channels. Press the Begin scanning button to enter the channel search interface.
Launch Live TV
After channel tuning is done for the first time, the screen will display Live TV operating tips.
[OK] load channel list.
[Up] load info bar.
[Down] load PVR/T.Shift.
[Back] jump to previous channel.
Viewing channel information
As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears
on the top of the screen.